A SELECT geared continuous hinge has been tested in accordance with ANSI 250.4-1994 test procedure and acceptance criteria for physical endurance for steel doors and hardware and has surpassed 25,000,000 cycles during testing by an independent laboratory. On a door cycling 400,000 times per year, a SELECT hinge will be performing for over 62 years.

SELECT geared continuous hinges are built to handle abuse from high-traffic applications. They are applied to the surface on the edge of the frame and door. No machining or reinforcement is required.

The revolutionary SELECT geared continuous hinge puts an end to costly and irritating hinge failure problems, the most common cause of entrance failure.

On conventional hinges, opening and "kickback" energy concentrate on a few inches of fastened reinforcing plate - with the top hinge handling 100% of the force. Pinless SELECT hinges bond the door and frame into an integrated, sag-free unit. "Kick-back" energy dissipates along the entire length of the door and frame. (Compare this to a conventional hinge's 4-1/2" to 5" at the top of the door and frame).

SELECT geared continuous hinges eliminate the gap between the door and frame, providing a weatherproof, rust-proof, tamper-proof barrier.

When the door is closed, there are no accessible screws, bolts or pins. SELECT geared continuous hinges are tested and listed by Underwriters Laboratories Inc. to standards UL10B, UL1OC (positive pressure) and UBC7.2. Hinges are fire-rated for up to 1-1/2 hours. A special patented process can be added to increase the fire rating to THREE hours (NO PINS REQUIRED).

Add to Cart:

  • Part #: SL21 CL SD 83
  • Shipping Weight: 9.875lbs
  • Manufactured by: Select Hinges

This product was added to our catalog on Friday 27 April, 2012.

Copyright © 2021 Colonial Lock Supply. Powered by Zen Cart.

Privacy Policy | Return Policy | Terms of Service